After you’ve prepared the entire project that your client has requested, it’s time to put it into practice. (how to install a laminate flooring in a medical clinic), The installation of laminate flooring is quite simple and easy to be done, being the perfect material for simpler reforms and done in a short time.Here are just a few important tips for applying this material that Dura floor selected!
Step by step to install laminate flooring
The installation of laminate flooring is simple, since it is a floating material – that is, it is not glued or nailed directly to the floor. Thus, with the fitting system, it is an easy and ideal process for those who are not looking for heavy renovations.
1. Separate the Materials
First of all, you need to have the tools that will be used to apply the boards. Are they:
In addition to them, it is also important to have safety materials (glasses, shoes, gloves, mask and ear protectors) and practical elements, such as adhesive tapes and vacuum cleaner.
2. Prepare the Subfloor
At this point, it is necessary to analyze the level of the floor. In case of irregularities, the final result may end up being harmed.So check for holes and bumps – both from 3 cm – or broken parts that need to be repaired. If there are, make a thin layer of cement that is sufficient to keep the surface smooth.
3. Protect against moisture
Before installing laminate flooring, it is necessary to protect the sub floor from moisture. In this way, there is no danger of infiltration of the new surface. A tip is to do the humidity test, gluing a plastic with adhesive tape and leaving it for 24 hours. If the material stores water droplets, it means that waterproofing is necessary. Then, a blanket must be added that will prevent direct contact with the sub floor.
4. Plan the installation of the laminate floor
It is not enough to just buy the boards and place them on the sub floor. You need to plan how they will be applied to calculate the ideal amount and how they will be laid out on the floor.The ways to install are:
longitudinal: length of the environment, with 7% loss;
transversal: width of the environment, with 7% loss;
diagonal: loss of 10%.